Precautions before operation of explosion-proof chain block


وقت الإصدار:

Mar 29,2023

Hand chain hoist is a kind of manual lifting machinery with simple use and convenient carrying. It is suitable for short-distance lifting of heavy objects or installation of small equipment. The lifting weight is generally not more than 100t. Explosion-proof hand chain hoist is made of bronze material that is not afraid of heat. It is not easy to generate mechanical sparks when in use and has good stability. The relevant requirements before the operation of explosion-proof chain block are as follows:

hand hoist is a kind of manual lifting machinery with simple use and convenient carrying. It is suitable for short-distance lifting of heavy objects or installation of small equipment. The lifting weight is generally not more than 100t. Explosion-proof hand hoist is made of bronze material that is not afraid of heat. It is not easy to generate mechanical sparks when in use and has good stability. Relevant requirements before operation of explosion-proof chain block are as follows:

1. Select explosion-proof chain block and lifting chain of corresponding tonnage according to the weight of equipment or workpiece to be lifted. The lifting tonnage, diameter, connecting bolt and strength of explosion-proof chain block shall be matched to meet the requirements to avoid stability accident.

2. Before using the explosion-proof chain hoist, it is necessary to carefully check that the lifting hook, lifting chain and rotating parts of the explosion-proof chain hoist should be flexible, the brake should be, check whether the sprocket guard of the explosion-proof chain hoist is in good condition, and whether the hand chain is in good condition. Make sure that the chain hoist has many accessories, does not reverse the chain, and all parts are stable.

3. When using a bridge crane for hanging, sling shall be used as the suspension point to fix the full cap of the shackle bolt of the explosion-proof chain block, and two layers of protection (bolt fixing pin) shall be adopted.

4. Before lifting, check whether the lifting chain of the explosion-proof chain block can be twisted or knotted, check whether the lifting weight is bound with the lifting weight, the lower hook assembly of the explosion-proof chain block cannot be turned over, and the lifting weight cannot be lifted with the hook tip of the lifting hook, so as to avoid sliding and tripping, resulting in decoupling.

5. Select the lifting point correctly according to the weight of the lifting object, and reinforce the lifting point when necessary.

6, regardless of single or double chain explosion-proof chain block, it is strictly prohibited to remove lifting hooks for use.

Because explosion-proof chain block is often used to lift heavy objects and the place of use is relatively special, it is also common to use it outdoors. What are the adverse effects of explosion-proof chain block used outdoors for a long time?

Impact 1: If the explosion-proof chain block is often used outdoors, a large amount of dust and other foreign matter will be deposited on the surface. If we do not clean it up in time, it will affect its normal use and reduce the working rate.

Impact 2: If the explosion-proof chain block often works outdoors, the cover is often destroyed by wind and rain. If the maintenance is not timely, the surface is prone to rust.

impact three: for the long-term work in the outdoor explosion-proof chain hoist, compared with other environments, the scrap speed of its parts will be accelerated, thus affecting the use of explosion-proof chain hoist performance and life.

Explosion-proof chain block is widely used. When used in all walks of life, it is necessary to operate according to the standard process. Now let's introduce the sequence of explosion-proof chain block in the use process.

1. After getting the explosion-proof chain block for the first time, we need to find technicians to install the explosion-proof chain block. After the installation is completed, we need to check the explosion-proof chain block and carry out the load test.

2. Before daily work, we also need to carry out routine inspection on explosion-proof chain block to see if the internal parts, hooks, chains, etc. are damaged. If the damage and wear are serious, we need to replace the parts immediately. We need to purchase the replaced parts from the original manufacturer to prevent the parts from being unified and affecting the use.

3. When we carry out lifting operations, we need to use them seriously in accordance with the user manual. Oblique pulling, hard pulling, overloading, etc. During the operation, be careful not to twist the wrong chain. The operator needs to operate the chain on the same plane with the hand sprocket. It is forbidden to move under the goods during lifting to avoid accidents.

4. After use, we also need to clean up the explosion-proof chain block, then apply anti-rust oil and store it in a dry environment.

التركيز على النقاط الساخنة

جاء رئيس جمعية مسبك الصين إلى الشركة للتحقيق في مشروع تجديد أدوات مقاومة للانفجار.

على جانوري 9 ، 2022 ، زانغ ليبو ، رئيس جمعية مسبك الصين ، فان تشي ، نائب الرئيس ، وحزبه جاء إلى شركتنا للتحقيق وتوجيه مشروع التطوير والتحويل للجيل السادس من الأدوات المقاومة للانفجار. السيد يانغ تشينغلاي ، رئيس شركة المجموعة ، رافق الشرح. أثناء التحقيق ، أشاد الرئيس Zhang Libo بشدة بمساهمة مجموعة Zhongbo المتميزة في أدوات الصين المقاومة للانفجار ، وأكد على تطوير مجموعة Zhongbo ، وأعطى الأمل لمستقبل مجموعة Zhongbo.

دعوة مجموعة Zhongbo من العملاء لزيارة العملاء في شيجياتشوانغ

تأسست مجموعة Zhongbo في عام 1983 وتم تطويرها للاحتفال بالذكرى الثامنة والثلاثين. تم إدراجه بنجاح في عام 2015. منذ بداية العملاء الوطنيين ، ذهبت منتجاتنا الآن إلى العالم. شكرا لك على وجود لك-

خبى بوتو لبناء قاعدة صناعة أدوات مقاومة للانفجار

في السنوات الأخيرة ، قامت مدينة بوتو ، مقاطعة خبى ببناء قاعدة صناعية بقوة للأدوات المقاومة للانفجار ، وأدخلت معدات إنتاج ذكية لتحسين أداء المنتجات المقاومة للانفجار ، وعززت الشركات الرائدة في تصنيع الأدوات المقاومة للانفجار للتحرك نحو ذكي ، الراقية ، طريق التنمية الدولية لمساعدة التنمية الاقتصادية الإقليمية. في عام 2020 ، ستحقق الشركات المصنعة للأدوات المقاومة للانفجار قيمة إنتاج تبلغ 0.28 مليار يوان ، تغطي البلاد بأكملها ويتم تصديرها إلى أكثر من 100 دولة ومنطقة.

بحث الشركة وتطوير منتجات جديدة حاوية سلسة مقاومة للانفجار مع قائمة ناجحة!

عقد مركز البحث والتطوير التكنولوجي بالشركة اجتماع عمل جديد لقبول المشاريع ، بحث وتطوير منتجات جديدة حاويات غير ملحومة مقاومة للانفجار من خلال القبول ، مدرجة رسميًا. تُستخدم العبوات المقاومة للانفجار على نطاق واسع في الأماكن القابلة للاشتعال والانفجار بخصائص مقاومة للانفجار لعدم وجود شرارة أو انفجار. المادة المستخدمة لصنع حاويات مقاومة للانفجار هي سبيكة نحاسية مقاومة للانفجار. عملية الإنتاج الأصلية هي قطع اللوحة إلى الشكل المقابل ولحامها. مثل دلو مقاوم للانفجار ، دلو النار ، إلخ. ومع ذلك ، فإن منتجات المعالجة هذه لها العديد من المشاكل والعيوب: مثل المظهر غير المنتظم. القطع ، التشكيل ، العقص ، اللحام ، كلها مصنوعة يدويًا ، لا يمكن أن تضمن ظهور المعايير ، الاتساق. ثانياً ، الصرامة سيئة. صناعة يدوية

مجموعة Zhongbo تدعو التجار للمشاركة في المعرض

نشكرك على دعمك وثقتك بمجموعة Zhongbo. من المقرر أن تشارك شركتنا في معرض الأجهزة الوطني الخريفي 68 في عام 2019 من 20 سبتمبر 2019 إلى 22 سبتمبر 2019 في مركز شاندونغ ليني الدولي للمؤتمرات والمعارض. رقم المقصورة: A188. من 26 سبتمبر 2019 إلى 28 سبتمبر 2019 ، شارك في معرض الصين الدولي الثاني عشر (Dongying) للمعدات البترولية والبتروكيماويات والتكنولوجيا في مركز النهر الأصفر للمؤتمرات والمعارض الدولية في دونغينغ ، شاندونغ. رقم المقصورة: t103. آمل أنه من خلال هذه الفرصة لمناقشة والتواصل مع شركتك ، حتى نتمكن من الحصول على مزيد من التعاون المتعمق. أنت مدعو بحفاوة للحضور.